Also known as a Rear or No Pull harness.
This harness is made of heavy nylon with a martingale effect over the shoulders to help slow the dog down. There is a ring on the front of the chest for more control if needed. When no pull is applied the dog has free shoulder movement and can run and play with it on. It is padded around the girth strap to protect the elbows.You can choose fleece or neoprene. Neoprene is better for areas where there are a lot of foxtails or where the dog goes in the water a lot. Extra small to Small sized harnesses usually have 5/8″ webbing. Medium to large have 3/4″ or 1″ webbing and extra large has 1″ webbing. If you have a preference for a certain width of webbing please pick the webbing width you want. For sizes smaller than what is stated below the webbing width will be adjusted.
Ribbons can be sewn onto the harnesses, or you can choose multiple colors for the harness to match your team colors(see gallery pictures).For 3/4″ or 1″ webbing, a team lanyard can be sewn onto the shoulder straps. Pick from the ribbons below that will fit your webbing size or type in the team you want for the shoulder straps. Note: For reversible ribbons, please state which color is dominant, background, color. If you want multiple colors on the harness type them in the webbing color box.
If your girth size does not fall into the smallest size below then pick the smallest webbing width available and the webbing size will be adjusted. You will need three measurements: Shoulder, between legs and girth. , If you have a young dog and need the harness to ‘grow’ with the dog, please put that information in the measurement input box. Please see the video on how to measure your dog for a “Jeepers’ harness. All custom items take approximately 2 weeks. Monitor colors may vary.
These are the normal webbing widths for the girth sizes listed below.
Xsmall- 17 to 20″ girth- 5/8″ webbing
Small- 21 to 23 1/2″ girth- 5/8″ webbing
Medium- 24 to 26″ girth- 3/4″ webbing
Large- 27 to 29″ girth- 3/4″ or 1″ webbing
XLarge- 30-35+” girth= 1″ webbing
Available Webbing: Apple Green available in 1″ only.
[Place cursor over or tap sample to read sample name]
*NOTE: THE RIBBONS SHOWN BELOW WILL FIT THAT WEBBING WIDTH, BUT MAY NOT BE THAT ACTUAL WIDTH!
Available Ribbons for 1/2″ webbing: [Place cursor over or tap sample to read sample name]
Available Ribbons for 5/8″ webbing: [Place cursor over or tap sample to read sample name]
Available Ribbons for 3/4″ webbing: [Place cursor over or tap sample to read sample name]
Available Ribbons for 1″ webbing: [Place cursor over or tap sample to read sample name]